SGC 120 MkII Firmware

SGC 120 MkII Firmware

You have chosen to download our software.

Within a few seconds, you will receive an email containing a download link.

Having trouble using the software? Please contact support@deif.com. 

Best regards, 

DEIF A/S

The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software

R16.00

New features

  • Added 0-5V sensor selection for pin 23.
  • Added Custom Sensor.
  • Added Activation & Delay for Custom Sensors.
  • EIC: Added support for Baudouin Gas.
  • EIC: Added support for Baudouin Wise10B.
  • EIC: Added support for Caterpillar ADEM 6.
  • EIC: Added support for Deutz EMR 5 Stage V.
  • EIC: Added support for Doosan Stage V.
  • EIC: Added support for Generic CPCB IV.
  • EIC: Added support for Isuzu.
  • EIC: Added support for Iveco Stage V.
  • EIC: Added support for JCB.
  • EIC: Added support for JCB 430/448 Stage V.
  • EIC: Added support for Jichai JC15D Weifu.
  • EIC: Added support for Jichai JC15T JG.
  • EIC: Added support for Jichai JC190.
  • EIC: Added support for Jichai WYS.
  • EIC: Added support for Jing guan.
  • EIC: Added support for John Deere.
  • EIC: Added support for John Deere Stage V.
  • EIC: Added support for Kohler.
  • EIC: Added support for MAN.
  • EIC: Added support for MAN EMC Step 2.0.
  • EIC: Added support for MAN EMC Step 2.5.
  • EIC: Added support for Perkins CPCB IV.
  • EIC: Added support for Perkins Stage V 120xJ.
  • EIC: Added support for PSI.
  • EIC: Added support for  Scania EMS2 S6.
  • EIC: Added support for Weichai Diesel.
  • EIC: Added support for Weichai e6gas.
  • EIC: Added support for Weichai Gas.
  • EIC: Added support for Weichai Wise10B.
  • EIC: Added support for Weichai Wise15.
  • EIC: Added support for Yuchai.
  • EIC: Added support for Generic CPCB4 +.
  • Added Auto Load Transfer In Manual for Mains as a separate parameter.
  • New Data added over Modbus. 

Changes

  • Interlock of breaker feedback added as an interlock for Contactor latching of Generator and Mains.
  • The breaker on the display now mimics the contractor feedback.
  • Limited Counter Reset removed. The user can now reset any change multiple times with a password.

R16.00

15. 10. 2024

New features

  • Added 0-5V sensor selection for pin 23.
  • Added Custom Sensor.
  • Added Activation & Delay for Custom Sensors.
  • EIC: Added support for Baudouin Gas.
  • EIC: Added support for Baudouin Wise10B.
  • EIC: Added support for Caterpillar ADEM 6.
  • EIC: Added support for Deutz EMR 5 Stage V.
  • EIC: Added support for Doosan Stage V.
  • EIC: Added support for Generic CPCB IV.
  • EIC: Added support for Isuzu.
  • EIC: Added support for Iveco Stage V.
  • EIC: Added support for JCB.
  • EIC: Added support for JCB 430/448 Stage V.
  • EIC: Added support for Jichai JC15D Weifu.
  • EIC: Added support for Jichai JC15T JG.
  • EIC: Added support for Jichai JC190.
  • EIC: Added support for Jichai WYS.
  • EIC: Added support for Jing guan.
  • EIC: Added support for John Deere.
  • EIC: Added support for John Deere Stage V.
  • EIC: Added support for Kohler.
  • EIC: Added support for MAN.
  • EIC: Added support for MAN EMC Step 2.0.
  • EIC: Added support for MAN EMC Step 2.5.
  • EIC: Added support for Perkins CPCB IV.
  • EIC: Added support for Perkins Stage V 120xJ.
  • EIC: Added support for PSI.
  • EIC: Added support for  Scania EMS2 S6.
  • EIC: Added support for Weichai Diesel.
  • EIC: Added support for Weichai e6gas.
  • EIC: Added support for Weichai Gas.
  • EIC: Added support for Weichai Wise10B.
  • EIC: Added support for Weichai Wise15.
  • EIC: Added support for Yuchai.
  • EIC: Added support for Generic CPCB4 +.
  • Added Auto Load Transfer In Manual for Mains as a separate parameter.
  • New Data added over Modbus. 

Changes

  • Interlock of breaker feedback added as an interlock for Contactor latching of Generator and Mains.
  • The breaker on the display now mimics the contractor feedback.
  • Limited Counter Reset removed. The user can now reset any change multiple times with a password.

R15.00

24. 04. 2024

New feature

• New engine protocol added:
  - Angle
  - Baudouin Wise10B
  - Baudouin Wise15
  - CAT ADEM6
  - Caterpillar ADEM 3
  - Caterpillar ADEM 4
  - Caterpillar ADEM Generic
  - Cummins CM2350
  - Cummins CM2358
  - Cummins CM2850
  - Cummins CM2880
  - Cummins KTA19
  - DDEC III
  - DDEC IV
  - Deutz EMR 2
  - Deutz EMR 3
  - Deutz EMR 4
  - Deutz EMR 5
  - Deutz EMR Stage V
  - Doosan G2 EDC17
  - Doosan MD1
  - Doosan Stage V
  - FPT EDC17
  - FPT Stage V
  - Hatz EDC17
  - Isuzu
  - Iveco CURSOR
  - Iveco EDC7
  - Iveco NEF
  - Iveco Stage V
  - Iveco Vector8
  - JCB
  - JCB 430 448 Stage V
  - Jichai JC15D WEIFU
  - Jichai JC15T JG
  - Jichai JC190
  - Jichai WYS
  - Jing Guan
  - Kohler
  - Kubota stage V
  - MAN
  - MAN EDC17
  - MAN EMC Step 2.0
  - MAN EMC Step 2.5
  - MTU ECU8
  - MTU ECU9
  - MTU J1939
  - Perkins ADEM 3
  - Perkins EDC17C49
  - Perkins Generic
  - Perkins Stage V
  - Perkins Stage V 1204J
  - Perkins StV 1200
  - Perkins StV 400
  - PSI
  - SDEC
  - Steyr EDC17
  - VE E483/E694 CPCB IV
  - Volvo Penta EDC 3 (1500)
  - Volvo Penta EDC 3 (1800)
  - Volvo Penta EDC 4 (1500)
  - Volvo Penta EDC 4 (1800)
  - Volvo Penta EMS 2.3
  - Volvo Penta EMS 2.4
  - Volvo Penta EMS2
  - Volvo Stage V
  - Weichai E6 gas
  - Weichai Gas
  - Weichai Wise10B
  - Weichai Wise15
  - Xichai Gas
  - YANMAR EDC17
  - Yanmar Stage V
  - Yuchai diesel
  - Yuchai gas
  - Yuchai Stage V
  - Yuchai YC-BCR
• Digital input H polarity reversed.
• Data for unavailable sensor is not visible from the EIC view page.
• External EGR support over digital input added.

R14.01

11. 12. 2023

SGC 120 Mk ll offline firmware initial release. R12.00 was the initial release for the SGC Mk ll variants. All previous releases were over smart flash.

New feature:

• Config and M-Logic flashing in live mode.
• Read event log in live mode.
• Added digital input sources in M-Logic.

 

Changes:

• Updated start sequence to avoid breaker closure before safety monitoring expires.
• Updated the protection configuration range.
• Removed duplicated strings from language pack.

DEIF 제품을 완전하게 활용하기 위해서는 DEIF에서 제공하는 업데이트를 설치하도록 항상 권장하고 있습니다.

업데이트된 소프트웨어는 언제나 무료로 www.deif.com의 “소프트웨어”에서 “소프트웨어 내려받기”를 통해 내려받기할 수 있습니다.

질문 또는 제품 관련 소프트웨어에 관한 문의는 DEIF A/S +45 96149614 또는 해당 지역의 DEIF 사무소로 연락해 주시기 바랍니다. 그 외에도, support@deif.com로 이메일을 보내 주시면 언제든지 도와드릴 준비가 되어 있습니다.