1.4.4.0 | 09. 03. 2025 | Version 1.4.4.0 based on 1.4.3.1 Changes - OEM branding via Product ID.
|
1.4.3.1 | 07. 02. 2025 | Corrections - This minor update fixes an issue where the TDU is not drawing the application drawing correctly when using BTBs.
|
1.4.3.0 | 11. 12. 2024 | Changes - Added support for two additional nominal settings buttons.
Corrections - Fixed communication issues with AGC v6.15.x.
|
1.4.2.1 | 14. 10. 2024 | Corrections - Fixed issue with home page application drawing becoming zoomed out with every power cycle or reboot from TDU restart.
- Fixed issue with TDU not connecting with AGC-4 Mk II application software version 6.14.0.
- Fixed show/hide of page 2-3 in home.
- Resolved issue with inhibit start button, inhibit stop button, inhibit GB/TB button and inhibit MB button commands.
|
1.4.2.0 | 11. 06. 2024 | New features 1- Confirm action pop-ups. Changes 1- New method for handling translations.
2- Tier 4 jump improvements. Corrections 1- Fixed issue with parameter dialogue not showing the correct state of the toggle switches. |
1.4.1.0 | 04. 01. 2024 | New features |
1.4.0.0 | 26. 10. 2023 | New features Supervision variant for TDU.
Changes Extended capability to read more VTA's.
Corrections Fixed issue with TDU not being able to connect to AGC-4 Mk II v6.08.0. Fixed issue with TDU not being able to connect to AGC-4 Mk II BTB.
|
1.3.12.0 | 25. 08. 2023 | New features Updated supervision to show hybrid variants.
Changes Added support for Volvo EMS.
Corrections Fixed TDU 107 supervision issue.
|
1.3.11.1 | 20. 06. 2023 | Changes • Fixed missing application supervision when there is a BTB controller in the application drawing. |
1.3.11.0 | 05. 03. 2023 | New features - Added support for FPT stage V engines.
Changes - Created separate pages for "Engine lamps" and "Exhaust aftertreatment".
- Added support for tree view translations.
- Made opening parameters more intuitive.
|
1.3.10.1 | 07. 10. 2022 | Corrections: 1- Fixed horizontal scrolling of Supervison.
2- Fixed missing "None" option in "Instrument Selection".
3- Fixed missing Custom Logo in "Log" and "Controller settings" pages.
4- Reset index when changing between "Controller settings" lists. |
1.3.10.0 | 13. 07. 2022 | Changes: - Logo and top bar branding.
- Branding configuration import and export.
Corrections: - Fixed glitch with negative values in alarm and event log.
- Fixed glitch with controller communication lost for 1-2 seconds every 13 or 25 minutes.
- Fixed glitch with TDU not able to connect to AGC-4 Mk II Mains controller.s for parameters
|
1.3.9.1 | 17. 02. 2022 | Changes: - Only show measurements supported by the connected ECU.
Corrections: - Fixed issue with writing alarm settings for parameters
|
1.3.9.0 | 12. 01. 2022 | Changes: - New application select page added to the setup menu.
Corrections: - Toggle switches are more accurate now.
- Fixed language export issue with empty AOP labels.
- Fixed missing semi button when activating the German AUS mode.
|
1.3.8.0 | 09. 12. 2021 | Changes: - Added option to hide application and nominal settings on instrument pages.
- New and updated customer branding.
Corrections: - IP can't be changed when disabling Master/slave when TDU is connected to slave.
|
1.3.7.0 | 31. 05. 2021 | New features: - Support for OEM product IDs in AGC-4 Mk II is added.
- Scania EMS S8 support is added..
- Block mode button is added.
- Master/slave controller manual switch is added.
Changes: - "AUS" mode for German option V0108 in "Auto" and "Test" mode is added.
Corrections: - Alarms are removed from the header when alarm conditions disappear.
- Fixed an issue with missing genset modes in the language file.
- Fixed that the genset mode would change if the password level was set to service or master.
|
1.3.6.0 | 23. 03. 2021 | New features: - Added support for OEM product IDs in AGC-4 Mk II.
- Extra safety pop up (Nominal setting + Plant mode).
- Translation file added with "TDU specific texts".
- "UpdatePackage.zip" includes software version.
- Support updatepackage.zip with lower case characters.
|
1.3.5.0 | 29. 01. 2021 | New features: - Added support for AGC-4 Mk II
- Added Customer branding
|
1.3.4.0 | 07. 12. 2020 | Supported on AGC-4 DG and AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.
Corrections: - Customer branding is added.
- Fixed the missing alarm texts for EIC alarms.
- Fixed the screen lock on the Log page, when updating logs from an empty list.
|
1-3-3-0 | 10. 09. 2020 | Supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1. New features: - Further brandings are added.
- AGC-4 as clock master is added.
Changes: - New entry point for the ECU measurement window is added.
Corrections: - Parameter max. value was not taken into account for text values.
- If exactly 9 alarms was present, the last one was not visible.
- Possibility to include system information when exporting a TDU.config file is added.
- Generator measurements are removed from mains TDU.
- Regeneration parameters are added to TDU.
- Application supervision now supports mains with ID 1-16 and DG´s with ID 17-32.
|
1.3.1.0 | 19. 02. 2020 | Supported on AGC-4 DG & AGC-4 Mains.
AGC-4 SW required: 4.76.1. New features: - Control panel instruments can now be custom scaled by pressing and holding 3 seconds.
- All voltage selections in parameter 9030 are now supported.
- Access lock is implemented, when the input are configured.
- New screen is added with current measurements shown graphically.
- M-Logic command "Inhibit. mode button" is now reflected in TDU.
- It is now possible to add a separate password for control panel instruments under "Permissions".
- Fuel level is now shown in the top bar, if parameter 10980, 10990 or 11000 is set to "RMI fuel level" via the utility software.
- Running hours is now shown in the top bar, if connected to a genset controller.
- Parameter shortcut is added on the control page; it can be enabled/disabled under "Display settings".
- Power Management ID and priority are added to the control panel, when connected to a genset controller.
- Auto Jump to Synchroscope page is added; it can be enabled/disabled under "Display settings".
- Import/Export: It is now possible to load a configuration file from an older software version.
Changes: - 20 pages are now available in the instrument panels on the control page.
- Lists of instrument measurements have been expanded.
- User access level filtering on the parameter page have been removed.
- DM1/DM2 texts have been expanded.
- When connected to a German AGC-4 with V0108 option, the manual button is removed.
Corrections: - Language management create export has been corrected, when specific German charecters are used in the controller translation.
- Visibility of the DM1 top icon has been corrected.
|
1.3.0.1 | 23. 09. 2019 | Only supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Corrections: - Corrected: AOP shortcut on control panel page.
- When changing mode, the confirmation dialogue now always pops up.
|
1.3.0.0 | 12. 09. 2019 | Supports AGC-4 DG & AGC-4 Mains controllers.
Minimum AGC-4 SW required: 4.74.3. New features: - Support of AGC-4 mains controller.
- Import/export of following settings via USB:
- Meters on homepage
- Password levels
- AOP texts
- All settings under "Display config" - Added "Connection to controller" text on start-up screen.
Changes: - TDU backlight timeout introduced.
- Fixed sporadic communication timeout messages on TDU.
- Extended number of status texts on the TDU.
Corrections: - Fixed screensaver freeze issue.
- Corrections to some status texts.
- Fixed rare initial communication issues.
- Create new master language function corrected
|
1.2.2.0 | 19. 06. 2019 | Only supported on AGC-4 DG.
Minimum AGC-4 SW required: 4.72.0. New features: - Implementation of offline USB update of TDU
- Added scrolling on supervision page
- Added hardcoded master password to DM1/DM2 clear button
- Enhanced user feedback during restart of TDU
- Added new EasyConnect text: "DG Ready to be added"
Changes: - Improved connection stability between TDU and AGC-4 controller
- Change scaling of Fuel rate measurement
- Internal production handling updated.
Corrections: - Correct Modbus offset for escape mode timer
- Improved stability of auto connect feature
- Added missing password prompt to AOP shortcut on home screen
- Fixed misplaced buttons in control panel
|
1-3-3-1 | | Supported on AGC-4 DG and AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.
Changes: - Extended search for renamed software packages is added. This means that for releases after 1.3.3.1 the TDU software package will include the version number.
Corrections: - Fixed connection problems in firmware ver. 1.3.3.0.
- Fixed DVC types on the parameter page.
- Fixed problems with parameter scaling and drop-down elements on the parameter page and in the USW dialogue.
|
