SGC 420 MkII Firmware

SGC 420 MkII Firmware

You have chosen to download our software.

Within a few seconds, you will receive an email containing a download link.

Having trouble using the software? Please contact support@deif.com. 

Best regards, 

DEIF A/S

The software is subject to copyright DEIF A/S
By following the above mentioned link and downloading the file you automatically accept DEIF A/S copyright and license agreement (EULA). The license agreement can be found on www.deif.com/software

R17.00

New features

  • DTC manager: added as a tool providing options to update SPN and FMI descriptions and ignore specific SPN/FMI codes.
  • Added the ability to display customer details on the boot-up screen through the display language tool.
  • Added Live link for remote display functionality.
  • Introduced a shutdown override function in digital inputs, allowing all shutdown alarms (except emergency stop) to be treated as warnings when activated.
  • Added "Shutdown" as an alarm action in the maintenance module.
  • Added activation and delay timers for custom sensors.
  • Added auto load transfer in manual mode as a separate parameter for mains.
  • Enabled external EGR support through digital input.
  • Added file information to relevant screens.
  • Added EIC data over Modbus.
  • Introduced an alternate nominal AC system.

Changes

  • Added breaker feedback interlock for generator and mains breakers.
  • The breaker status on the display now mimics the contractor / breaker feedback.
  • Nominal AC system configuration moved from alternator configuration to nominal values.
  • Updated Phase reversal handling during the stop sequence.
  • Updated EIC protocols:
      - Improved SDEC protocol handling.
      - Updated MTU ECU9 Eminox protocol.
      - Updated Volvo Stage V protocol.

R17.00

03. 02. 2025

New features

  • DTC manager: added as a tool providing options to update SPN and FMI descriptions and ignore specific SPN/FMI codes.
  • Added the ability to display customer details on the boot-up screen through the display language tool.
  • Added Live link for remote display functionality.
  • Introduced a shutdown override function in digital inputs, allowing all shutdown alarms (except emergency stop) to be treated as warnings when activated.
  • Added "Shutdown" as an alarm action in the maintenance module.
  • Added activation and delay timers for custom sensors.
  • Added auto load transfer in manual mode as a separate parameter for mains.
  • Enabled external EGR support through digital input.
  • Added file information to relevant screens.
  • Added EIC data over Modbus.
  • Introduced an alternate nominal AC system.

Changes

  • Added breaker feedback interlock for generator and mains breakers.
  • The breaker status on the display now mimics the contractor / breaker feedback.
  • Nominal AC system configuration moved from alternator configuration to nominal values.
  • Updated Phase reversal handling during the stop sequence.
  • Updated EIC protocols:
      - Improved SDEC protocol handling.
      - Updated MTU ECU9 Eminox protocol.
      - Updated Volvo Stage V protocol.

16.00

27. 06. 2024

New Features

• EIC : Added support of Generic CPCB4+.
• EIC : Added support of Perkins CPCB4+.
• EIC : Added support of Scania EMS2 S6.
• EIC : Added support of Baudouin Gas.
• EIC : Updated SPN description database.
• Added Digital Input functions in M-logic Commands.
• Updated Custom Sensor Range Change to -3000 to 3000
• X (resistance, mA / V) Value in Live data view.
• Added DTC over MODBUS.
• Added Shutdown as fail Class in Maintenance Alarm.

 

Changes

• Run Hour Time available in both hours & minutes.

 

Corrections

• Fixed issue when "Auto Restore Inhibit" & "Mains Load Inhibit" are configured together.

R15.00

28. 02. 2024

SGC 420 Mk ll offline firmware.

New feature:

• Added these EIC protocols:
• PSI
• Isuzu
• Kohler
• JCB
• JCB 430/448 Stage V
• MAN
• Yuchai
• FPT Stage V
• Perkins Stage V
• Perkins Stage V 1204J
• Cummins KTA19
• Jichai JC15D Weifu
• Jichai WYS
• Jichai JC190
• Jichai JC15T JG
• Deutz EMR 5 Stage V
• Doosan Stage V
• Cummins CM2850
• Weichai e6gas
• Caterpillar ADEM 6
• Yanmar Stage V
• Volvo Stage V
• Volvo Penta EMS2
• MTU J1939
• Iveco Stage V
• Jing guan
• Deutz EMR 4
• Doosan G2 EDC17
• FPT EDC17
• Hatz EDC17
• MAN EDC17
• Perkins EDC17C49
• SDEC
• Steyr EDC17
• Xichai Gas
• YANMAR EDC17
• Yuchai YC-BCR
• Angle
• Baudouin Wise15
• Iveco CURSOR
• Iveco EDC7
• Iveco NEF
• Iveco Vector8
• Cummins CM2350
• Cummins CM2880
• Cummins CM2358
• DDEC III
• DDEC IV
• Deutz EMR 2
• Deutz EMR 3
• Deutz EMR 5
• Doosan MD1
• Kubota stage V
• MAN EMC Step 2.0
• MAN EMC Step 2.5
• MTU ECU8
• MTU ECU9
• Caterpillar ADEM 3
• Caterpillar ADEM 4
• Caterpillar ADEM Generic
• Perkins ADEM 3
• Perkins Generic
• Perkins StV 1200
• Perkins StV 400
• Volvo Penta EDC 3 (1500)
• Volvo Penta EDC 4 (1500)
• Volvo Penta EDC 3 (1800)
• Volvo Penta EDC 4 (1800)
• Volvo Penta EMS 2.3
• Volvo Penta EMS 2.4
• Weichai Gas
• Baudouin Wise10B
• Weichai Wise10B
• Weichai Wise15
• Yuchai diesel
• Yuchai gas
• VE E483/E694 CPCB IV

 

Changes:

• Fixed issue with mains timer.

R14.07

11. 12. 2023

SGC 420 Mk ll offline firmware initial release. R12.00 was the initial release for the SGC Mk ll variants. All previous releases were over smart flash.

New feature:

• Added EIC - DDDEC protocol.
• Added EIC - John Deere protocol.
• Added EIC - John Deere Stage V Protocol.
• Added EIC - Scania S8 protocol.
• Added EIC - Kohler KDI3404 protocol.
• Added EIC - Bosch EDC17CV54 protocol.
• Added auto start and stop inhibit inputs.
• Added short to battery to sensors 3 and 4.
• Implemented Quick Flash (without config mode) for M-Logic.

 

Changes:

• Updated start sequence to avoid breaker closure before safety monitoring expires.
• Removed the status screen lock during the start and stop sequences.
• Removed duplicated strings from display language pack.
• Removed duplicated strings from language pack.

DEIF 제품을 완전하게 활용하기 위해서는 DEIF에서 제공하는 업데이트를 설치하도록 항상 권장하고 있습니다.

업데이트된 소프트웨어는 언제나 무료로 www.deif.com의 “소프트웨어”에서 “소프트웨어 내려받기”를 통해 내려받기할 수 있습니다.

질문 또는 제품 관련 소프트웨어에 관한 문의는 DEIF A/S +45 96149614 또는 해당 지역의 DEIF 사무소로 연락해 주시기 바랍니다. 그 외에도, support@deif.com로 이메일을 보내 주시면 언제든지 도와드릴 준비가 되어 있습니다.