The DEIF ASC-4 Wind is a programmable sustainable controller that allows integration of one or more wind turbines in any power plant. It is ideally suited for hybrid microgrid applications, particularly in a power or energy management system (PMS/EMS) with other intelligent DEIF controllers such as the ASC-4 Solar, ASC-4 Battery, and AGC-4 Mk II.
Turbine and park communication
Using Modbus communication, the ASC-4 Wind can communicate with a single wind turbine (interfacing with the turbine’s built-in controller) or with an entire wind park, acting as a link between the wind park power management (WPPM) system and the PMS/EMS. Depending on the capabilities of the turbine controller or WPPM, the ASC-4 Wind can be configured to send and receive set points or start/stop commands, and it can be used for breaker control.
Maximising green power
When deployed as part of an EMS/PMS, the ASC-4 Wind is included in the control strategy of the power plant, balancing the available sources to deliver the required load while maximising renewable power penetration. Its built-in Q factor control allows the ASC-4 Wind to stabilise the power factor of hybrid microgrids if the voltage or frequency is temporarily unstable.
In addition, its built-in curtailment counter gives you a useful overview of surplus wind power production. These features help you improve operation planning and control, for example by helping you identify excessive use of gensets and adjusting operating strategies accordingly so you can maximise wind power use in your applications.
Fully customised solution
The ASC-4 Wind is available as a fully customised solution for specific projects. Contact us to discuss your requirements and find a solution that lets you integrate wind power in your plant.
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
Automatic sustainable controller ASC-4 Solar
- Solar, storage, wind, Mains and genset integration in hybrid applications
- ASC-4 sustainable controllers and AGC-4 Mk II/AGC 150 let you control up to 32 gensets
- Simple graphical configuration
- Uptime guaranteed through spinning reserve
- Maximised sustainable power penetration
- Load dependent genset start/stop
- Minimum genset load constraint
- Ideal for self-consumption applications
- Highly customisable with user-friendly M-Logic tool
- Control of breaker
- Record time commissioning with DEIF Emulation
- uses and verifies the functions of the real system for test, production and design - Suitable for power management solutions fitted with AGC-4, AGC 150 or AGC 200 genset controllers
- Suitable for stand-alone solutions using multi-instruments such as DEIF’s MIB or MIC
Automatic Sustainable Controller ASC-4 Battery
- Solar, storage, wind, Mains and genset integration in hybrid applications
- ASC-4 sustainable controllers and AGC-4 Mk II/AGC 150 let you control up to 32 gensets
- Applications with up to 16 sustainable power plants
- Simple graphical configuration
- Communicates with BCU, BMS, or PCS over Modbus
- Charging/discharging based on SOC or Schedular Command timers
- Optimal genset load constraint
- Define and change priority of connected power sources
- Controls functions, energy source or power source
- Grid-forming, grid-following, or droop mode (virtual synchronous generator)
- Uptime guaranteed through spinning reserve
- Maximised sustainable power penetration
- Load dependent genset start/stop by PMS or DO
- SOC dependent genset start/stop by DO - Rental
- Minimum genset load constraint
- Ideal for self-consumption applications
- Highly customisable with user-friendly M-Logic tool
- Control of breaker
- Record time commissioning with DEIF Emulation
- uses and verifies the functions of the real system for test, production and design - Suitable for power management solutions fitted with AGC-4, AGC 150 or AGC 200 genset controllers
- Suitable for stand-alone solutions using multi-instruments such as DEIF’s MIB or MIC
Automatic genset controller AGC-4 Mk II
- Automatic Mains Failure sequence
- Multi-master Power Management
- Power Management Core (32dg)
- Power Management Extended (>32dg)
- RMB Transformer maintenance with up to 32 gensets
- PLC
- Engine CANbus
- Din rail mount
- Flexible Hardware
- Additional CANbus based I/O (9 x CIO modules)
- Redundant controller
- Redundant CANbus for Power mamangement
- N+X configuration
- Close Before Excitation / Run-up synchronization from 6 seconds
- DEIF digital AVR DVC550 support
- Multi purpose PID´s
- Gridcode compiant with: VDE AR-N 4110/4105 (Medium voltage, Germany, VDE AR-N 4105 (low voltage, Germany, EN 50549-1:2019 (Europe), ENA EREC G99 (United Kingdom)
- Touch Screen Supported (TDU107)
- Tier4 final/stage5
- Emulation for easy training and FAT
- Hybrid EMS support (1)
- Heavy consumer (via ALC-4)
- Fuel optimisation
- Fully compatible with AGC 150 and ASC-4
- TÜV pending and UL approved
Flexible ESS controller ASC 150 Storage
Single controller:
- Useful for rental and brownfield applications
- Automatically charges and discharges the ESS
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Requires power measurement and breaker feedback for other power sources
- Only one source: Can use the controller's 4th current measurement.
- Multiple power sources: Measurements from:
- Genset controllers (DEIF or third parties)
- Power meters
- Transducers -
Power management communication is not required
Power management:
- Automatically charges and discharges the ESS
- Automatically uses the ESS as spinning reserve for PV and microgrids
- Automatically starts and stops generators
- Automatically closes and opens breakers
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Optimises the fuel consumption
- Balances the loads in the system
- Uses the plant logic
- Makes sure that the system is safe
Flexible PV controller ASC 150 Solar
Single controller
- Useful for brownfield applications
- Makes sure that there is a minimum genset load
- Optimises the diesel genset load for high efficiency and low carbon footprint
Power management
- Automatically maximises PV power
- Automatically Load-dependent start and stop generators
- Automatically closes and opens breakers
- Optimises the diesel genset load for high efficiency and low carbon footprint
- Balances the loads in the system
Off-grid applications
- With a genset:
The controller uses the genset power measurements to calculate the set points for the PV power.
- With storage:
The controller combines the available PV power with the charge/discharge scheme to determine the set point for the PV power.
Grid-tied applications
- Feed surplus PV energy to the grid
- Charge the energy storage system (ESS)
- Regulate PV production to match the self-consumption
