Renew Energy Maintainance
Renew Energy Maintainance
RENEW Energy Maintenance repeatedly experienced control system failures on their Suzlon S64 wind farm in Southwest Minnesota and a general lack of flexibility. A control system retrofit replaced the existing turbine controller and the electrical pitch system and provided them with maximized availability and new life to the turbine.
An increased number of failures on the control system
Over the past decades, thousands of wind turbines have been installed worldwide and it is common that after ten years of operation their performance starts decreasing and faults occur. At RENEW Energy Maintenance’s remote wind project in Minnesota, they faced similar problems.
“These turbines historically had high rates of control system failures with limited flexibility in terms of improvements, whether that be control logic improvements or hardware improvements, such as upgrading components,” explains RENEW’s Director of Operations Nick Siddens.
RENEW was on the lookout for a cost-effective retrofit solution that would make the aging turbines run more efficiently and increase profitability. Many potential suppliers were in play but in the end, RENEW decided to partner with DEIF.
“After considering all our options, we moved forward with DEIF because of their willingness to work with RENEW to provide a very robust and affordable system for ourselves and our current customers. Not only did this improve the performance of the project, it also qualified for 80% of the Production Tax Credits”.
Jim Mikel
President, RENEW Energy Maintenance
100% service independence and ownership of the control system
Significant revenue is lost when wind turbines are down and due to the harsh environments, the controller eventually will fail. To make a successful retrofit, a lot of important parameters need to be fulfilled.
"We made a thorough analysis of the wind turbines’ performance and the conditions under which they operate and based on that we tailored a solution that would meet Jim and his team’s expectations”, says Jan Harrestrup, Vice President, DEIF.
Besides extending the turbines’ lifetime significantly, the availability of the turbines has been optimized with a two-digit number. The immediate result is that the turbines 6 months after the retrofit have produced more energy than the previous 12 months.
“The upgrade is very extensive, and it completely replaced the pitch control – it switched us over to a system that we have complete ownership of and access to,” says Nick Siddens, Director of Operations, RENEW Energy Maintenance.
“Since the retrofit, these turbines have been running great and we see it in our production and availability. The improvements were immediately apparent, and we continue to see incremental gains as we dial these systems in.”
Nick Siddens
Director of operations, RENEW Energy Maintenance
Improved performance and high availability
Ever since the turbines were retrofitted, RENEW Energy Maintenance has observed significant performance improvements and now have a more reliable and effective turbine control system.
Not only do the retrofitted turbines run smoothly but RENEW Energy Maintenance also has gained total control of the operations and enjoy their independence. They have full access to all relevant data and performance reports to monitor the turbine availability.
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
